Step 4 - Circuit.
- Flying Standard Take Off, Circuit And Flypast Procedure Turn Circuit And Procedure Turn
- Circuit Rectangular Circuit And Land Getting It Together Dead Stick Landing
Fly your model back upwind from it's exit from the previous Procedure Turn until it is directly in front of you.
Start the second Circuit and trace a constant radius over the ground. It should also be the same size as the circuit flown in Step 3 .
Bank gently into the circuit maintaining a constant height. The first and fourth quarters of the circuit (upwind) will require les aileron and elevator than the second and third. Ensure that you force the model upwind and, equally important, ensure that you don't go too far downwind.
The circuit should end with the model going wings level directly in front of you.
You should now be back on the same track that you flew on the Fly Past.
Clockwise Circuit
 |
Counter-Clockwise Circuit
 |