| Random files |
41 viewsGus Combes's biplane on landing approach
|
|
Lanc's. at Woodvale 200963 viewsReady for the big bang, blow up the dummy dam with bouncing bombs.
|
|
Tail Control Horns12 viewsThe control horns are screwed to the elevators and rudder with a small amount of Threadlock applied to each screw. The tail wheel has also been fitted. The tail wheel is not connected to the rudder and is free to castor.
|
|
Waypoint 90 amp esc.25 views
|
|
The old and the new bellcrank.29 viewsThe old bellcrank's holes were to big so the linkage had to much slop so i made a new one from fiber glass sheet.
|
|
Waiting out the rain45 views
|
|
69 viewsThis little electric pylon racer, brought by one of the visitors, caused much intrigue, The main question being asked, however, was "Where can I get one?"
|
|
P-3124 viewsA small profile stunter which was one of the demonstrators I flew at the Sandown Symposium for two or three years. Not exactly beautiful, but it helped keep the crowd entertained. PAW19 powered.
|
|
| Last additions |
Raptor restored24 viewsRaptor 50 looking good again after a traumatic experience a few weeks ago. LOL
IainMar 05, 2011
|
|
Raptor 5029 viewsHi Folks
I joined the club last week and have been flying the past two weekends. I've met a lot of the members so far and they have been great, very helpful. Dave and Iain have kept me right with my Raptor (much appreciated). I've tried flying before with little success, so decided to do it properly this time and join a club. The advice and tips i've picked up already has made it well worth doing (should have done it years ago). Looking forward to getting a lot of flying in and meeting everyone else.
IainFeb 01, 2011
|
|
Raptor 5024 viewsAnother picture of my Rapter 50
IainFeb 01, 2011
|
|
Starbomb 228 viewsAnother stunter for an Enya 19, but this time an own design. Can't remember what happened to it - I think I gave it away to a clubmate to learn aerobatics on.Sep 26, 2010
|
|
P-3124 viewsA small profile stunter which was one of the demonstrators I flew at the Sandown Symposium for two or three years. Not exactly beautiful, but it helped keep the crowd entertained. PAW19 powered.Sep 26, 2010
|
|
Neurosis26 viewsSo named because its predecessor was a disappointment, this was one of my best F2B stunters but sadly was destroyed when flying in strong winds the pull on the lines was enough to starighten out the end of one of the leadouts, despite it being a three turn coil of 18 swg piano wire.Sep 26, 2010
|
|
Warrior30 viewsA Veco kit from the 50's, I built this one in the 80s. Enya 19 up front and at 22 ounces went very well. Unfortunately, there was fuel seepage somewhere because after a year or so of declining performance, I weighed it - 30 ounces!Sep 26, 2010
|
|
Slowcoach29 viewsNot one of my better efforts. Intended as a low loaded fun flyer, it came out about a pound heavier than I expected (insufficient attention to wood selection, probably) with resultant diminished agility.Sep 23, 2010
|
|
